Home › Category Archives › errors

TeXstudio Is Not Responding

I have been using TeXstudio for some time now, and have highly enjoyed using. However, just now it has been acting up. Whenever I open the program, my cursor always reverts to the wait-cursor, this one enter image description here , and it is rather annoying. Not only is this an issue, but I TeXstudio won't compile any of my documents.

Has anyone ever dealt with this issue?

EDIT: Here is the code that is apparently giving me trouble:

% Regular polygons
\documentclass{article}
\usepackage{tikz}
\begin{document}

% Radius of regular polygons
\newdimen\R
\R=0.8cm

\begin{tikzpicture}

    % Indicate the boundary of the regular polygons
    \begin{scope}[yshift=-3\R]

        \draw (0:\R) \foreach \x in {60,120,...,359} {
                -- (\x:\R)
            }-- cycle (90:\R) node[above] {Hexagon} ;

        % 360/7 = 51.4286 For PGF v < 1.18 we have to round to the nearest
        % integer. Newer version support fractional angle values.
        % For a more accurate result use the sequence
        % {51, 103, 154, 206, 257, 309}
        %
       \end{scope}

\end{tikzpicture}

\begin{tikzpicture}

    % Indicate the boundary of the regular polygons
    \begin{scope}[yshift=-3\R]
        \draw (-0.8,0) -- (0.8,0); 
        \draw (0,-0.7) -- (0,0.7);
        \draw (0,-0.7) --
        \draw (0:\R) \foreach \x in {60,120,...,359} {
                -- (\x:\R)
            }-- cycle (90:\R) node[above] {Hexagon} ;

        % 360/7 = 51.4286 For PGF v < 1.18 we have to round to the nearest
        % integer. Newer version support fractional angle values.
        % For a more accurate result use the sequence
        % {51, 103, 154, 206, 257, 309}
        %
       \end{scope}

\end{tikzpicture}

\end{document}

"Failed to find …x.pdf" error message in Texstudio

I have been using Miktex for years and now wish to use Texstudio as it looks much easier and faster. To do so, I set up Texstudio on my PC and wrote a very simple code to start off. However, the code working in Miktex is not working in Texstudio. The error message launched is "Failed to find ...x.pdf" and the code is as follows,

 \documentclass[a4paper, 11pt]{article}
 \begin{document}
 Hello World!
\end{document}

I would be happy if you let me know what I am doing wrong

Any help would be greatly appreciated

Cheers

Günal

Errors using chemstyle in LaTeX [closed]

I am a total novice with no TeX or programming experience, trying to learn how to use LaTeX in general, but specifically attempting to use the 'chemstyle' package, so as to allow for automated numbering of my chemical compounds when drawn in ChemDraw and saved as '.eps' files containing temporary labels of 'TMP'.

I am currently using MikTeX and TexStudio (also have TeXworks) and have attempted both manually installing the chemstyle package from CTAN and directly from the MikTeX repository with no apparent difference between the two.

I have been using the tutorial here and typing the lines below in my preamble:

\usepackage[crop=off,runs=2]{auto-pst-pdf}
\usepackage{chemstyle}

I can't remember where I got it from but the inclusion of "crop=off" eliminates an intial error of:

pdfcrop: The Perl interpreter could not be found.
Process exited with error(s)

I have also attempted to enable shell escape in the command line, I think successfully, as I've read in a few places that it's necessary with this package.

Unfortunately whether I use my own file or the example ones given in the tutorial, the file never compiles successfully and I get a lot of error messages concerning 'caption3.sty' such as:

Command \caption@ifinlist already defined. \@expandtwoargs\caption@@ifinlist}

as well as a warning about 'typearea.sty'.

Below is a basic version of my document:

\documentclass[oneside,14pt,parskip=full]{scrbook}

\usepackage{graphicx}
\usepackage[left=2in,right=1.3in,top=1.3in,bottom=1.3in]{geometry}

\usepackage[crop=off,runs=2]{auto-pst-pdf}
\usepackage{chemstyle}

\usepackage{libertine}

\addtokomafont{chapter}{\Huge\scshape}
\addtokomafont{section}{\mdseries\LARGE\it}
\addtokomafont{subsection}{\fontsize{20}{24}\selectfont\bfseries}
\addtokomafont{subsubsection}{\fontsize{17}{20}\selectfont\mdseries\scshape}

\usepackage{fancyhdr}

\fancypagestyle{main}{ %
\fancyhf{}
\fancyhead[L]{\rightmark}
\fancyhead[R]{\leftmark}
\fancyfoot[C]{}
\fancyfoot[R]{\thepage}
\renewcommand{\headrulewidth}{0.4pt}}

\newcommand{\markedsection}[2]{\section[#2]{#2%
\sectionmark{#1}}
\sectionmark{#1}}
\newcommand{\markedchapter}[2]{\chapter[#2]{#2%
\chaptermark{#1}}
\chaptermark{#1}}

\fancypagestyle{plain}{%
\fancyhf{}
\fancyfoot[R]{\thepage}
\renewcommand{\headrulewidth}{0pt}
\renewcommand{\footrulewidth}{0pt}}

\usepackage[nottoc]{tocbibind}

\newcommand*{\TitleFont}{\scshape
      \fontsize{35}{20}
      \selectfont}

\title{\TitleFont Thesis}
\author{A Name}
\date{\today}
\publishers{Dept.\\Uni.}

\begin{document}

\frontmatter

\pagestyle{plain}
\maketitle
\tableofcontents
\listoffigures
\listoftables

\chapter{Acknowledgements}

Some thanks.

\chapter{Abstract}

An abstract.

\chapter{Glossary}

This is the glossary...

\mainmatter
\pagestyle{main}

\markedchapter{Intro}{Introduction}
\label{ch:intro}

Here is the introduction.

\markedsection{Sec1}{First Section}
\label{sc:sc1}

\subsection{First Subsection}
\label{subsc:subsc1}

\subsubsection{First Subsubsection}
\label{subsub:subsub1}

\backmatter

\chapter{Appendices}

\end{document}

Thank you in advance for any help you can give and apologies if I've left out any necessary information.

Edit: The output message following an attempt to compile is as below.

Process started: "C:\Program Files\MiKTeX 2.9\miktex\bin\pdflatex.exe" -synctex=1 -interaction=nonstopmode "chemstyle".tex

This is dvips(k) 5.992 Copyright 2012 Radical Eye Software (www.radicaleye.com) ' TeX output 2013.11.12:1417' -> chemstyle-autopp.ps <C:/Program Files/MiKTeX 2.9/dvips/base/tex.pro> <C:/Program Files/MiKTeX 2.9/dvips/misc/alt-rule.pro> <C:/Program Files/MiKTeX 2.9/dvips/psfrag/psfrag.pro> <C:/Program Files/MiKTeX 2.9/fonts/enc/dvips/libertine/lbtn_c7kyj5.enc> <C:/Program Files/MiKTeX 2.9/fonts/enc/dvips/libertine/lbtn_s5bq4i.enc> <C:/Program Files/MiKTeX 2.9/fonts/enc/dvips/libertine/lbtn_c6xmqr.enc> <C:/Program Files/MiKTeX 2.9/fonts/enc/dvips/libertine/lbtn_xogrpz.enc> <C:/Program Files/MiKTeX 2.9/fonts/enc/dvips/libertine/lbtn_p657rp.enc> <C:/Program Files/MiKTeX 2.9/dvips/base/texps.pro> <C:/Program Files/MiKTeX 2.9/dvips/base/special.pro> <C:/Program Files/MiKTeX 2.9/dvips/base/color.pro>.

<C:/Program Files/MiKTeX 2.9/fonts/type1/public/libertine/LinBiolinumT.pfb> <C:/Program Files/MiKTeX 2.9/fonts/type1/public/libertine/LinBiolinumTB.pfb> <C:/Program Files/MiKTeX 2.9/fonts/type1/public/libertine/LinLibertineTI.pfb> <C:/Program Files/MiKTeX 2.9/fonts/type1/public/libertine/LinLibertineT.pfb> <C:/Program Files/MiKTeX 2.9/fonts/type1/public/amsfonts/cm/cmr12.pfb>[1] [1] [2] [3] [4] [5] [6] [7] [1] [2]

Process exited with error(s)